Tel: +44 (0)1405 861800

BICR01

BICR01 - Rev Loose Ring with Lozenge

Stainless steel 16mm mouthpiece with split revolving lozenge which allows independent rein action and distributes the pressure across the tongue and the bars of the mouth, with 70mm loose rings.

Additional information

Mouthpiece Width

, ,

Ring Size

Mouthpiece Thickness

Mouthpiece Material

Trial Option

,

£28.00

  • 5inch / 125mm
  • 5.25inch / 135mm
  • 5.75inch / 145mm
  • No Trial
  • With 30 day Trial
Clear
30daytrial

CLICK HERE

For more information on how the trial system works

Description

Made to Jeffries stringent specifications in modern foundry conditions, with laboratory controlled metallurgy, using lost wax precision casting. This ensures precise temperature-controlled conditions essential for accuracy of components. Each Bit, Spur Stirrup is hand-assembled by craftsmen, with attention to detail, and finished to a high polish, maintaining traditional Eldonian quality standards.

The Centre Revolver bits are a Revolutionary design by Jeffries. New to the Market 2006.

My belief of this bit is that it is one of the best designs so far, the lozenge is one of my favorite mouthpieces and now it comes with independent side action. This is going to provide riders with something they have not seen or used before, they will sit lovely in the horses mouth and are suitable for most breeds, if you have never tried a lozenge mouthpiece before, are currently using a French link or you have a lozenged mouthpiece, I suggest you give one of these a go. This is going to be a big seller!!!!

Loose Rings

The loose rings snaffles make a more mobile bit than an eggbutt or fixed cheek bit, which should encourage your horse to keep a relaxed jaw and mouth the bit. The loose ring may be useful if your horse leans on the bit, or takes hold, as the bit is always movable so the horse cannot take hold as easily as they could with a fixed cheek. This bit is also useful for gaining contact as the movable mouthpiece enables the bit to fit the mouth, contour the tongues natural position and sit comfortably.

Stainless Steel Revolver Lozenge

The Lozenged Mouthpiece bits have proven the of the most popular of bits. The mouthpiece is the New French Link, it has a oval shaped link in the centre. The lozenge shaped link contours the tongue and forms a true contact. It has no protruding pressure points like the French link does (where the flat link joins the mouthpiece); it has 2 joints, which means the pressure of the bit is distributed over both the tongue and bars of the mouth. Because the mouthpiece has two joints, it shouldnt cause any interference with the roof of the mouth. The Lozenge uses tongue pressure to encourage the horse to go on the bit and lower the head, it has bar and lip pressure but not a squeezing action like that of a bit with a single joint. The more joints a bit has the less likely the horse is to lean as the bit becomes more mobile.

Because of the split centre Lozenge which revolves, this gives a independent rein action, allowing one half of the bit to be used whilst the other half stays put, not causing the whole bit to lift in the mouth. A superb design by Jeffries…..

Additional information

Mouthpiece Width

, ,

Ring Size

Mouthpiece Thickness

Mouthpiece Material

Trial Option

,

preloader