RB6050 – KY Single Jointed Rotary Dutch Gag

KY Single Jointed Rotary Dutch Gag

Product Code: RB6050

£33.00

Mouthpiece Width

5.25inch / 135mm
5.75inch / 145mm
5inch / 125mm

Clear

RB6050 – KY Single Mouth Rot. Dutch Gag

All about the ‘Rotary Bit’ by Ms. Hilary Vernon, UK Horse Trainer, Equestrian JournalistSo often we only have bits available for sale with large irregular joints that are not comfortable for the horse and when you consider that the tongue fits the whole of the inside of the mouth and any bit is sandwiched between the top of the tongue and the roof of the mouth it makes it even more crucial for the centre of the bit to be as comfortable as possible. Rotary Bits, instead of having a conventional joint have a centre ball swivel that can rotate 360 degrees which means you get the advantage of a jointed bit with no uncomfortable conventional joints and the ability to give the rider a far better turning signal.

Dutch/Continental CheeksThe Continental Gag should be worn with 2 reins preferably; the first rein should be used on the snaffle ring, which is the first ring adjacent to the mouthpiece. When the first rein is attached to the snaffle rein it is used just like a loose ring hanging cheek bit, which uses poll pressure and lip pressure due to the sliding loose ring also applies various pressures in the mouth depending on the mouthpiece it is in conjunction with. When the second rein is attached to the ring below, the pressures are increased as the lower rings produce more leverage. In the instance of using 2 reins then this bit can be used as a hanging cheek bit and then when more help is required, the second rein can be brought into play. If the bit is only used with one rein on the lower ring, then the pressure in applied constantly and no pressure release is available for the horse.
The gag produces a head raising action and is often used for cross country and/or jumping where the head needs to be raised quickly in order to gain control and so to get ready for the next jump.

Single Jointed Bits

The single joint puts pressure on the sides of the tongue, on the lips and on the bars due to the nutcracker. The single jointed bits also may have a head raising action so would be less suitable for your horse if they ride with a high head carriage or above the bit. Also breeds such as Irish Draughts, may have particularly large tongues, therefore having less room in the mouth for a single jointed bit as this pushes the bit nearer the roof of the mouth, also Arabs and alike may have a low palate, both of these examples may not benefit from the single jointed bits as the nutcracker action may cause brushing of the roof of the mouth.

Additional information

Mouthpiece Width	5.25inch / 135mm, 5.75inch / 145mm, 5inch / 125mm
Mouthpiece Material	Stainless Steel

CHOOSE YOUR BIT

Choose your bit from our extensive range and don’t forget to select your size.

TRIAL OR BUY

Choose if you would like to buy the bit for a straight purchase or choose to Trial for 30 days

PAYMENT

Payment can be made using debit or credit card through our secure payment gateway

KEEP OR RETURN

If the bit is unsuitable and was a buy now, it can be returned if it is unused and in its original packaging. If you have opted for the 30 day trial you can return the bit within the 30 days and will receive a refund minus the hire fee applicable to the item trialled.

30 Day Trial Terms & Conditions – UK & NI

The trial fee varies per product as this price is related to the retail price.

Please take care of the bit, as it is the customer’s – (the holder of the account that the bit is purchased on) responsibility to make sure that the bit is kept in good condition throughout the trial period and thereafter. The customer is also responsible that the bit is kept safe from theft and loss as without return of the bit no refund will be issued.
It is recommended that the bits are returned via a tracked postal facility as The Horse Bit Shop cannot be held responsible for any loss or damage in the post when being returned.
On return of bits on 30 day trial you will receive a refund for the price of the bit minus the trial fee. No trial fee is charged for a bit not returned to us.
We operate a bit library and therefore the trial bit you receive may not be new but will have been fully sterilised and be fit for purpose. If you have received a trial bit there is an option to exchange it for a brand new bit before the end of the trial period should you decide to keep the bit.
Normal wear is accepted on returned bits however we ask that they be returned clean and dry and fit for purpose. Bits should not be put in the dishwasher or cleaned with abrasive material as this can damage the material.
The 30 day trial is not available on every bit. Any item that does not allow you to select the ‘With 30 day trial’ option is purchase only.
Trials are not offered on any non-metal bit due to the fact they are not as resistant to wear and tear and cannot be sterilised to the required standards.
On occasion we offer trials on other items (not bits). The terms and conditions remain the same.
Shipping via Royal Mail Tracked 48 is included as standard. Tracked 24 or courier can be arranged upon request but will be subject to any extra cost.

30 Day Trial Period

The trial period ends 30 days following the date of dispatch and this is the return date by which the item should reach The Horse Bit Shop.
Dates to which the bit should be returned may be subject to change if the day falls on a Public Holiday.
The Horse Bit Shop reserves the right to charge extra trial fees or refuse refund if the bit is returned late.

36 Day Trial Period – Other Countries (Worldwide)

For other countries where shipping times are longer, the trial period will be increased to a maximum of 36 days according to the current postal delivery times. The 36 day trial period will commence from the date that The Horse Bit Shop posts the bit. This will be the date of the email automatically sent to advise dispatch.
Shipping via Royal Mail International Tracked is included as standard. Shipping via Courier can be arranged upon request but will be subject to any extra costs.
Any customs import charges imposed by the receiving Country are payable by the recipient.
Any returned bits are expected to be returned via airmail, as surface mail can take up to 50 days for some countries. Please allow plenty time for the bit to reach the UK as you will not be entitled to a refund until the bit is returned, even if the bit is in transit. The Horse Bit Shop cannot be held responsible for any loss or damage in the post when being returned.
Please ensure that any customs paperwork is filled in correctly and marked as a returned item as we will not be liable for paying or refunding any import charges.
Upon successful return of bits on trial you will receive a refund for the price of the bit minus the trial fee. No trial fee is charged for a bit not returned to us.
Normal wear is accepted on returned bits however we ask that they be returned clean and dry and fit for purpose. Bits should not be put in the dishwasher or cleaned with abrasive material as this can damage the material.
The trial option is not available on every bit. Any item that does not allow you to select the ‘With 30 day trial’ option is purchase only.
Trials are not offered on any non-metal bit due to the fact they are not as resistant to wear and tear and cannot be sterilised to the required standards.
We aim to send brand new bits to alleviate the necessity to return to exchange for new however this may not always be possible. All bits sent will be fit for purpose and fully sanitised.
On occasion we offer trials on other items (not bits). The terms and conditions remain the same.

BITS VALUED/TYPE	HIRE CHARGE
up to £75.00	£10.50
£75.01 – £100.00	£12.50
£100.01 – £125.00	£14.50
£125.01 – £150.00	£16.50
£150.01 – £175.00	£18.50
£175.01 – £220.00	£20.50
£220.01 – £250.00	£22.50
£250.01 – £275.00	£24.50
over £275.01	£26.50

TEL: +44 (0)1405 861800

UK's largest Bitting Specialists & comprehensive Bit Bank Service